Does attenuator affect tone? -

Does attenuator affect tone?

Tone changes In an ideal world, attenuators would allow you to use any amp at any volume level without any adverse effect on sound quality or reliability. In practice, the use of attenuation does change tone, but blaming the attenuator isn’t always justified.25-Apr-2016

Why is there an attenuator on my cable modem?

Generally, line attenuators are designed to reduce the signal level to bring it down to specs without distorting the signal waveform.

What does a 20 dB attenuator do?

This 20 dB power passing attenuator is used for adjusting signals in 75 ohm networks that carry satellite radio,and are also required to pass DC voltage for powering in-line amplifiers and antennas and reduces the amount of signal carried within coaxial cables.

Why do we use attenuators?

Attenuators are electrical components designed to reduce the amplitude of a signal passing through the component, without significantly degrading the integrity of that signal. They are used in RF and optical applications.

Do attenuators work with combo amps?

COMBO AMP: When using an attenuator with a combo amp, place the unit between the amp’s speaker out and the speaker itself. Most combo amps have internal speakers that can be unplugged from the amp chassis using a 1/4″ phone plug. UNPLUG the speaker from the amp.

What is 20dB attenuation?

When you compare cable performance and a manufacturer states that the attenuation (power loss) for a cable operating at 100MHz, with a length of 90 meters is 20dB, it means that the signal strength has dropped by a factor of 100.

Do attenuators damage tube amps?

WILL AN ATTENUATOR DAMAGE MY AMP? Electrically speaking, it would make no real sense for an attenuator to damage an amplifier considering these devices come after the amp in the signal chain.

Do attenuators degrade sound quality?

Attenuators can reduce the input impedance of the amp and that could affect sound quality.04-Jan-2012

What does a coax cable attenuator do?

A coaxial attenuator is an electronic device specifically designed to reduce the power of a signal without affecting or reducing the waveform of the signal significantly. An attenuator works exactly opposite of an amplifier which increases the power of the signal without altering the waveform.

Will an attenuator damage my amp?

The truth of the matter, as has already been explained here, is that attenuators don’t hurt amps, running them dimed can be hard on tubes.10-Aug-2012

How do you wire an attenuator?

Run a short speaker cable from the output of the amp to the INPUT of the attenuator. You may then plug the speaker directly into the SPEAKER OUTPUT (not “Line Out”) of the attenuator, or use a male-to-female extension cable if the speaker’s wire won’t reach.

Where are attenuators used?

Attenuators are used as volume control equipment in broadcasting stations. For testing purposes in laboratories, to obtain smaller voltage signals, attenuators are used. Fixed attenuators are used to improve the impedance matching in circuits.

What is 10 dB attenuation?

The 10 dB corresponds to a voltage attenuation ratio of K=3.16 in the next to last line of the above table.

How do you use fiber optic attenuator?

Connector type attenuator looks like a bulkhead fiber connector. Usually, it has a male plug connector at one side to allow fiber attenuator to be plugged directly into receiver equipment or adapters in patch panel, and at the other side there is a female type fiber optic adapter to allow the patch cords to plug in.

How do I choose an attenuator?

Attenuators should be able to handle required power safely. In best practice, it is recommended to pick one with higher power handling capability than your required power. It is good to have an attenuator with better heat dissipation if the application requires handling high power especially in hot environments.

Can you damage a tube amp?

Never, never, never run the amp with no speaker plugged in. This can cause major damage. Do not flip the power switch off, then back on rapidly. This can cause power supply damage.

Where do you put an attenuator?

To use an attenuator, connect a speaker cable from one of your amp’s speaker outputs to the attenuator’s input, and then connect another speaker cable from the attenuator’s output or through jack to the speaker cabinet’s input jack.

Where is the attenuator placed?

The attenuator network is inserted between a source and a load circuit to reduce the source signal’s magnitude by a known amount suitable for the load. Attenuators can be fixed, fully variable or variable in known steps of attenuation, -0.5dB, -1dB, -10dB, etc.

Do I need a cable attenuator?

Chances are you don’t. Modern amplified antennas will automatically cut signals that are too high, and you probably don’t need an attenuator at all unless you’re literally right next door to a broadcast tower.

What does a 30db attenuator do?

These attenuator pads are used when a signal needs to be reduced to protect measurement equipment or other circuitry, to extend the range of power meters and amplifiers, and to impedance match circuits by reducing the VSWR seen by adjacent components.11-Mar-2019

Amazon.com: bnc attenuator

1-16 of 113 results for “bnc attenuator” Acxico 1Pcs Q9/BNC Type Coaxial Fixed Attenuator Connector DC-6GHz 3W 50ohm 10 15 20 40dB 7 $16 98 $18.99 Get it as soon as Tue, Aug 17 FREE Shipping on orders over $25 shipped by Amazon More Buying Choices $15.39 (2 new offers) 2W BNC-J.K Coaxial RF Attenuator DC to 6.0GHz,1-40db,50 Ohm (10db) 17 $19 88

BNC Attenuators – Interconnects – Mouser

BNC Attenuators – Interconnects are available at Mouser Electronics. Mouser offers inventory, pricing, & datasheets for BNC Attenuators – Interconnects.

BNC Attenuators – Centric RF

BNC Attenuators The BNC attenuators below feature brass bodies, and a vswr max of 1.25 0-4Ghz. BNC Attenuators are used in many rf systems to reduce signal levels or to provide matching. The Centric RF BNC attenuators incorporate a resistive network. C4B-1 BNC Attenuator 1db VSWR 1.25 4Ghz 50ohm

BNC Attenuators | Arrow.com

BNC Attenuators BNC Attenuators Shop Arrow.com for BNC attenuators from leading manufacturers including HUBER+SUHNER and Pomona Electronics. Sort and filter by maximum attenuation, tolerance and more. Buy in single or bulk quantities. Fast shipping available. Auto Filter 5 products Edit columns Showing Results for Attenuators Fixed Attenuators (5)

BNC 50 Ohms Attenuators – Interconnects – Mouser

BNC 50 Ohms Attenuators – Interconnects are available at Mouser Electronics. Mouser offers inventory, pricing, & datasheets for BNC 50 Ohms Attenuators – Interconnects.

BNC 50 Ohm Fixed Attenuators – Pasternack

BNC 50 Ohm Fixed Attenuators The RF dB attenuation range for Pasternack BNC 50 Ohm fixed attenuators is from 1 dB to 40 dB. The frequency range of our BNC 50 Ohm fixed attenuators is from DC to 4 GHz. This product line includes low to high power attenuators which have the power handling up to 100 Watts.

READ Does Starbucks classic syrup have sugar?

BNC 50 Ohm Step Attenuators – pasternack.com

BNC 50 Ohm Step Attenuators The RF dB attenuation range for Pasternack BNC 50 Ohm step attenuators is from 1 dB to 110 dB. The frequency range of our BNC 50 Ohm step attenuators is from DC to 2 GHz. This product line includes low to high power attenuators which have the power handling up to 6 Watts.

BNC Resistor Attenuator – Pomona Electronics – Attenuators

BNC Attenuator Kit. Pomona Electronics. BNC Resistor Attenuator . Pomona Electronics. Model 4108. Images; BNC Resistor Attenuator. Model 4391 – BNC Resistor Attenuator. Pomona Electronics. Use to add series resistance to coaxial lines with BNC connectors. Datasheets. Datasheets: 4391 Series; Specifications.

PDF BNC Attenuators – Digi-Key

BNC Attenuators PART NUMBER AND DESCRIPTION Part No. Attenuation Impedance Frequency Power (dB) (Ohm) (GHz) (Watt) 120082 3 50 0 to 1 1 120083 6 50 0 to 1 1 120084 10 50 0 to 1 1 120085 20 50 0 to 1 1 120086 Attenuator kit containing one each of the above attenuators in a hard case. BNC ATTENUATORS SPECIFICATIONS

BNC Low Power Fixed Attenuators – APITech

BNC Fixed Attenuator Models up to 2 Watts 9033 Fixed Coaxial Attenuator (BNC, DC-4 GHz) Inmet product. View Products 9014 Fixed Coaxial Attenuator (BNC, DC-4 GHz) Inmet product. View Products Markets We Serve Radars and Electronic Warfare Wireless Communications Space Avionics and Transportation High-Temp Industrial Medical Military Communications.

BNC (M-F) Attenuator – Pomona Electronics

Model Number Model Name ; 4108-10DB : BNC (M-F) Attenuator : 4108-14DB : Atten,Coax,BNC(M),BNC(F),50 Ohm,14Db : 4108-20DB : Atten,Coax,BNC(M),BNC(F),50 0Hm,20Db

Cheap 10X inline BNC attenuator? – Page 1 – EEVblog

An 1M attenuator won’t work in a 50Ohm system either since the 50Ohm input load will drag the output of 1M attenuator ro practically zero. Therefore, you need an attenuator specifically designed for your target measurement system. For 1M case you mentioned, you need your attenuator to look like an 1M load from source when the sink is also 1M.

BNC Attenuators 30 dB Fixed – Fairview Microwave

BNC attenuators fixed (also known as Bayonet Neill-Concelman attenuator) from Fairview Microwave ship same-day globally from our ISO registered facility. Fairview Microwave BNC attenuator fixed coaxial series supports a maximum attenuation level of 30 decibel (dB) with 50 or 75 Ohm impedance and is in-stock regularly.

Attenuators – Bnc Attenuator

20dB BNC Attenuator 20dB BNC Attenuator In excellent condition. Unit has passed functional testing. Free of any damage. Free shipping for domestic orders* Same Day Handling Time! Returns: Please contact directly if there is an issue with your order. Our goal is to make sure you are satisfied and we would like to resolve any issues you may have.

Amazon.com: bnc attenuator

Amazon.com: bnc attenuator 33-48 of 204 results for “bnc attenuator” Male Type RF Connector 2pcs BNC Female to SMA Coaxial Adapter Test Converter $7 09 Save 10% with coupon Get it as soon as Wed, Jan 12 FREE Shipping on orders over $25 shipped by Amazon Only 1 left in stock – order soon.

C4B-2 BNC Attenuator 2db – Centric RF

C4B-2 BNC Attenuator 2db VSWR 1.25 4Ghz 50ohm. $28.00) Bulk Pricing: Buy in bulk and save Bulk discount rates ×. Below are the available bulk discount rates for each individual item when you purchase a certain amount

BNC Attenuators – Field Components

BNC Attenuators are used with high frequency cables and connectors. Field Components BNC Attenuators are available for fast shipping from over 250,000 custom RF Microwave Products. BNC Attenuators are available to ship worldwide in standard and custom combinations upon request.

BNC (M-F) Resistor Attenuator | Pomona Electronics

Pomona Electronics – Distributor Inventory Search. Model Number. Model Name. 4391-75. BNC 75 Ohm Attenuator. 4391-50. BNC (M-F) Resistor Attenuator, 50 Ohm.

RF Industries – BNC attenuator – Tessco

RF INDUSTRIES’ 1 W 10 dB attenuator. BNC Male – BNC Female connectors. Broadband, Cellular & Data Radios

BNC Medium Power Coaxial Attenuators – APITech

BNC Fixed Coaxial Attenuators from 5 to 50 Watts. 4BNC5W Fixed Coaxial Attenuator (BNC, 5W, DC-4 GHz) Inmet product.

Attenuators BNC — MECA Electronics, Inc.

Current price $44.52. Description:MECA’s 612-06-2 BNC (Male/Female) fixed attenuator features a frequency range of DC-4.0 GHz, an average power rating of 2 watts and is View full details. Original price $44.52 – Original price $44.52.

bnc attenuator products for sale – eBay

67 sold. Tektronix 011-0060-02 DC to 2 GHz, 2W, 5X, BNC (M-F) Fixed Attenuator. Tested! $33.99. Was: $39.99. Free shipping.

50 Ohm BNC Attenuator | Products & Suppliers | Engineering360

RF Attenuators – 50 Ohm Fixed Attenuator, Low Power (1 to 2 Watts) — 50 F-XXX- BNC Supplier: JFW Industries, Inc.

BNC RF Attenuators | Products & Suppliers | Engineering360

Description: RF coaxial fixed attenuator SA03B-30 from Fairview Microwave is manufactured with a BNC input. This coax BNC attenuator is 50 Ohm and an in-line RF attenuator design. Our 50 Ohm BNC to BNC attenuator is constructed to precise. Attenuation: 30 dB.

RF Attenuators – Newark

Date/Lot Code. RF Fixed Attenuator, BNC Plug to BNC Jack, DC to 500MHz, 2 W, 50 ohm, Brass. POMONA. The date & lot code information will be displayed on your packaging label as provided by the manufacturer. You previously purchased this product.

BNC Attenuators – JJS Tech

JJS Technical Services 1900 East Golf Rd., Suite 950 Schaumburg, IL 60173 1-866-4 JJSTECH (1-866-455-7832) [email protected]

Four coaxial attenuator BNC set – picotech.com

Attenuator set: 3-6-10-20 dB, 1 GHz 50 Ω 1 W BNC (m-f) The TA050 attenuator set consists of four coaxial attenuators designed for use with signals up to 1 GHz. Each attenuator has a male and a female BNC connector. Usage note. The TA050 attenuators must be used with a matched 50 Ω source and load. If you wish to attenuate a signal before

TPI Individual BNC Attenuator, 20 dB 0.5 Watt – 120085

120085 Individual BNC Attenuator, 20 dB 0.5 Watt by Test Products International. Features. Increase the input range of an oscilloscope. Reduce the output level of fixed amplitude signal sources. Connect low impedance sources to instruments with high-impedance inputs.

BNC Attenuator

RG405 Cable flexi Tflex-405 ADAPTER Stationary phase cable Multiflex 86 RG178 1dB Fixed Attenuator SMA Male To 50 OHM BNC SMA FEMALE TO SMP MALE SAM BNC Feed-Thru Termination 011-00 DIN 7/16 MALE TO N FEMALE FIXED NON MAGNETIC IPEX MHF 20279-001 E-01 /U.FL N TEE FEMALE CRIMP FOR RG142B/U 14.5 N TEE PLUG CRIMP FOR RG142B/U male N TEE PLUG CRIMP

2 dB BNC Fixed Coaxial Attenuator – DC-2 GHz 1-Watt BNC-ATT-02

2 dB – BNC Fixed Coaxial Attenuator. Quality matters and American Radio Supply is a trusted supplier of genuine OEM components. We supply the U.S. Armed Forces and RF Communication Professionals worldwide.

BNC attenuator questions : AskElectronics

BNC attenuators that have the “readback” pin. No. They don’t. what are the drawbacks to connecting a 10:1 probe to the other end of a BNC that already has a 10:1 BNC attenuator? That won’t work. The probe expects 1 MΩ impedance of the scope, not 50 Ω. Attenuators are 50 Ω.

READ Does sulfur smell go away?

Basic Understanding of Attenuators – Utmel

The step ped attenuator is an attenuator with a fixed value (for example, 1dB) and an adjustable proportional multiple at equal intervals. It is sub divided into manual step attenuator s and programmable step attenuator s. 3. Connector F orm and C onnection S ize. The connector types are divided into BNC type, N-type, TNC type, SMA type, SMC

Rotary – Attenuators – RF Parts

100337-F Attenuator, Rotary, -120dB/10db steps, BNC, 8301A010 Attenuator, Rotary, 0-10dB, 1 Watt, DC-1GHz, BNC Female, Bird (Used Condition), 50R-158 Attenuator, Rotary, 0-10dB, 2 watt, Type-N Female, DC-2000 MHz, JFW, 50R-080-N Variable Attenuator, 0-12dB, DC-2000 MHz, 2 watt, JFW (Clean Used), 135-004 Replacement Knob for JFW Model 50R-028 Rotary Attenuator , 135-003 Replacement Knob for

Attenuator – Crystek

SMA 50 Ohm Attenuator (Click heading to sort) Part Number Package Frequency Range (MHz) Attenuation Operating Temp (°C) Power (MAX) Info Req Spec Buy Online; CATTEN-01R0-BNC: BNC Housing: DC to 1000: 1.0 dB (-40 to 85) 2.0 watt: CATTEN-01R5-BNC: BNC Housing: DC to 1000: 1.5 dB (-40 to 85) 2.0 watt: CATTEN-02R0-BNC: BNC Housing: DC to 1000: 2.0

Voltage Attenuators for Data Acquisition Devices

High Precision Attenuators for TPCX, TPCE and TraNET devices. 2-Channel 20:1 Precision Attenuator. Key Capabilities. Input: 2 BNC with adaptor plug 4 mm 1 socket 4 mm (System GND)

Rotary – Attenuators – RF Parts

50R-019-BNC JFW Rotary Attenuator, 0-10dB -1dB steps, DC-2200 MHz, 2 Watt, BNC Female Connectors (Pull) Regular Price: $79.95 Special Price $64.95

RF Attenuators – Fixed Precision Attenuators, High-Power Attenuators

RF Attenuators Over 400 coaxial, surface mount, and MMIC attenuator models for 50-Ohm & 75-Ohm system including fixed attenuators, high-power attenuators, digital step / programmable attenuators, voltage variable attenuators and more!

2910-6 BNC Attenuator 50 Ohm – Coaxicom

2910-6 BNC Attenuator 50 Ohm. SKU: 2910-6 Category: Attenuators Tags: 50 Ohm, Attenuator, BNC. Special Pricing Available. Due to rapid fluctuation in commodities, please call for best possible pricing. Please call (866) COAXICOM (International: +1 772.287.5000) or email [email protected].

50KFA-005 BNC Fixed Attenuator Kit – JFW Industries

Model 50KFA-005 is a fixed attenuator kit with BNC type RF connectors. All kit components rated DC-2200 MHz. This kit contains: (6) 50 Ohm BNC fixed attenuators i.e. 1dB, 2dB, 3dB, 6dB, 10dB, 20dB. (1) 50 Ohm BNC feedthru termination. (1) 75 Ohm BNC feedthru termination. (2) impedance matching pads with BNC. Additional information.

PDF Tektronix: Attenuators/Terminations Selection Guide

015-1001-01 Attenuator 50 ±1.0 2X 6 ±0.3 18 GHz 1 500 1.15 (DC to 4 GHz) 1.25 (4 to 12.4 GHz) 1.35 (12.4 to 18GHz) 015-1002-01 Attenuator 50 ±1.0 5X 14 ±0.5 18 GHz 1 500 1.15 (DC to 4 GHz) 1.20 (4 to 8 GHz) 1.25 (8 to 12.4 GHz) 1.35 (12.4 to 18 GHz) 015-1003-00 Attenuator 50 ±1.0 10X 20 ±0.5 18 GHz 2 500 1.15 (DC to 4 GHz)

2910-3 50 Ohm BNC Attenuator – Coaxicom

2910-3 50 Ohm BNC Attenuator. SKU: 2910-3 Category: Attenuators Tags: 50 Ohm, Attenuator, BNC. Special Pricing Available. Due to rapid fluctuation in commodities, please call for best possible pricing. Please call (866) COAXICOM (International: +1 772.287.5000) or email [email protected].

3 dB BNC Fixed Coaxial Attenuator – DC-2 GHz 1-Watt BNC-ATT-03

3 dB – BNC Fixed Coaxial Attenuator. Quality matters and American Radio Supply is a trusted supplier of genuine OEM components. We supply the U.S. Armed Forces and RF Communication Professionals worldwide.

BNC Fixed Attenuators – Konnect RF

KAT177231-40 Fixed Attenuator, BNC Male/Female, 50 Ohm, DC-1 GHz, 1 Watt, 40 dB KAT177365-20 Fixed Attenuator, BNC Male/Female, DC-2 GHz, 10 Watt, 20 dB

Pomona 5513 BNC attenuator kit Pomona 5513 | TEquipment

BNC ATTENUATOR KIT. Use to attenuate signals in coaxial lines. Show More. Show Less. View Product Details. List Price: $468.99.

Pomona 4391 50 OHM BNC Resistor Attenuator

Key Features: Use to add series resistance to coaxial lines with BNC connectors. Please select a region, state or province. The Pomona 4391-50 is a 50 ohm resistor attenuator with BNC connectors. Operating Temperature: +102º C (+216º F) Max. Power: 2W @ 25º C Max. Only registered users can write reviews.

10:1 attenuator for automotive oscilloscope diagnostics

10:1 Attenuator. With high bandwidth and fault protection, the 10:1 attenuator allows you to measure fuel injector and primary ignition waveforms using PicoScope oscilloscopes. The TA197 is a passive 10:1 attenuator. This means that, for example, a 10 V signal at its input appears as a 1 V signal on its output.

BNC Fixed Attenuator 75 Ohm 4 dB – Stonewall Cable

This 75 Ohm BNC Fixed Attenuator is used to reduce signal levels by 4 dB. Other attenuation values are available. Please contact Sales for more information. Specifications. BNC Fixed Attenuator 75 Ohm 4 dB Specifications. Name. BNC Fixed Attenuator 75 Ohm 4 dB. Short Description. BNC Fixed Attenuator 75 Ohm 4 dB.

Fixed Attenuators – Coaxial, Low Power

“BNC” Attenuator 0.5 dB / 50 ohm / DC – 2 GHz (RF) 50F-000.5. JFW “BNC” attenuator. 0.5 dB, 50 ohm. DC – 2 GHz. $9 each – $8 (3+) Coaxial Inline Fixed Attenuator 1 dB / 20 watt (1 kw Peak) Enlarge Image (RF) 23-1-34. Weinschel coaxial inline fixed attenuator. 1 dB, 20 watt (1 kw peak). “N” female x “N” male connectors. 1-9/16″ diameter x 2-5/8

"BNC attenuators" and "BNC amplifiers"

An attenuator is effectively the opposite of an amplifier, though the two work by different methods.While an amplifier provides gain, an attenuator provides loss.

Coaxial Step Attenuators – Surplus & Sales

Weinschel stacked step attenuator. 0 – 110 dB in 1 dB steps with indicating circuitry for both decks. 0 – 3 GHz. Two “11” step rotary attenuators in series with position proving contacts run to external solder terminal board. Concentric shafts: 1/8″ and 1/4″. 1-1/4″D x 3-1/2″ behind panel depth.

4391-50 – Pomona – RF Fixed Attenuator, BNC Plug to BNC Jack, DC to 500MHz

The 4391-50 is a BNC Resistor Attenuator used to add series resistance to coaxial lines with BNC connectors. It comes with PTFE dielectric, silicone rubber gasket/seals and non-inductive film resistor. The 4391 is made of brass with tarnish resistant, gold-plated brass male contact and gold-plated beryllium copper female contact.

Attenuators – Trout Underground

ALAN 50V70-1723 BNC LOTof 26 Step Attenuator- ID 36390. The Manufacturer’s Description. ALAN 50V70-1723 BNC Step Attenuator LOT of 26 Step Attenuators ID 36390-KM What Condition is this Item In? This is a used item that we have obtained from a liquidated facility. It comes as pictured and you can see its overall good condition.

BNC Attenuator, m-f, 1W 6GHz 6dB 50 OHM

BNC. arrow-left-circle. BNC Attenuator/Through Termination. 100023619. Coax. BNC Attenuator, m-f, 1W 6GHz 6dB 50 OHM. BNC Attenuator/Through Termination. Catalogue. Item number: 100023619 (Old item number J01006A0023)

READ Does Timbuk2 make good backpacks?

Offset Attenuator Project – HOMING IN

A short BNC jumper cable goes from attenuator to receiver. To make battery testing and replacement easy, I added a snap-in battery holder outside the case. For easy attachement of the attenuator to measuring-tape beams, I mounted a spring grip (Everbilt #568117, available in the “closet organizer” department of Home Depot) to the back of the

40 dB Fixed Attenuator BNC Male to Female attenuator 10W 8.5Ghz – Teruilai

Teruilai is a 40 dB Fixed Attenuator BNC Male to Female attenuator 10W 8.5Ghz company, we provide good quality of 40 dB Fixed Attenuator BNC Male to Female attenuator 10W 8.5Ghz. If you want to buy our 40 dB Fixed Attenuator BNC Male to Female attenuator 10W 8.5Ghz, please contact us.

50 Ohm Single Rotor Manual Attenuators – JFW Industries

50 Ohm Single Rotor Manual Attenuators The JFW 50 Ohm single rotary attenuator has been a staple tool to RF engineers for over 30 years. Our years of proven quality and performance make our manually variable attenuators right for any RF environment. Whether you are using the rotary attenuator at your RF test bench or mounting it to a panel, the JFW single rotary attenuator makes adjusting

PDF BNC Attenuators, DC – 4 GHz, 2 Watts, Models 9033-XX

ATTENUATORS BNC, DC – 4 GHz, 2Watts SPECIFICATIONS: Models: 9033-XX 9033: REV H 1.36 ±.04 [34.5 ±1.0] Ø.50 [12.7] Model Number: HOWTO ORDER: 9033-XX dBValue Ordering Examples: Model Number: 20 dB; BNC – Male/Fem Model Number: 9033-20 9033-6 6 dB; BNC – Male/Fem MALE/MALE & FEMALE/FEMALEVERSIONS ARE ALSO AVAILABLE, SEEINMET MODELNUMBERS 9014

BNC Attenuator, Plug to Socket, 20dB – Radiall | CPC UK

The R412420124. is a 3GHz 20dB BNC Attenuator with gold over nickel plated beryllium copper female center contact, gold over nickel-plated brass male center contact and nickel-plated brass body. This attenuator has PTFE insulation, thick film resistor, worldwide standardised coaxial connectors, bayonet coupling and good RF performance.

PDF BNC ATTENUATOR R412.403 – Allied Electronics

BNC ATTENUATOR R412.403.124 3 DB 3 GHZ 1W Series : ATTENUATOR Issue : 0826 A In the effort to improve our products, we reserve the right to make changes judged to be necessary. ELECTRICAL CHARACTERISTICS Frequency (GHz) DC – 2 2 – 3 V.S.W.R (≤) 1.20 1.30 Deviation(±dB) 0.30 0.50 Operating Frequency Range DC – 3 GHz

RDL RU-VA2 Dual Adjustable Video Attenuator – BNC

A single input jack is provided for each attenuator. The output jack is intended to be connected to a 75 Ohm terminated load. A front-panel knob is provided to adjust hot video levels down to the normal 1 volt p-p signal level. A single attenuator is capable of adjusting down the video level to half the incoming signal level.

ATT-20 Variable Attenuator – Scanner Master

output connector: BNC/m. input/output impedance: 75 Ohms. size: 18,5 x 34 x 70 mm. weight: 35 g. This device provides a variable fine control attenuation in a very wide frequency range. It utilizes a quality Piher attenuator with the range from 0 to 20dB. Zero attenuation corresponds to the clock-wise stop and maximum attenuation to the anti

www.richardsonrfpd.com

Add To Order. Quote. BNC: 0: 2: R412400124: R412400124: Radiall: Attenuator – Fixed Coaxial: Request Quote for Lead Time: 1: Call RFPD: Quote. BNC: 0: 3: R412401000

4108-10DB: Pomona Electronics : BNC Attenuator 50 Ohm M-F 10Db Attenuation

BNC Male-to-Female 50Ω Attenuator. 10 dB attenuation; Use to attenuate signals in coaxial lines. Materials: Body and Fittings – Brass per QQ-B-626, Alloy 360, ½ Hard

50 Ohm BNC Feed-Thru Impedance Adapter or Attenuator – Page 1 – EEVblog

Re: 50 Ohm BNC Feed-Thru Impedance Adapter or Attenuator. The feed-thru terminators are 50 ohm resistors between the signal and shield. If you measure its resistance (using an ohmmeter) while disconnected, it will read 50 ohm. An attenuator will have an attenuation value associated with it (such as 3 dB, 20 dB, etc).

Cal Test CT3369A-30 BNC Male to Female Fixed Coaxial Attenuator (30 dB

Compare. BNC Attenuator, m-f, 50ohm, 30dB (100x) 4GHz 2W ND. Instrument grade BNC male to female 30 dB 50 O fixed coaxial attenuator. Useful in a wide variety of applications including impedance matching and level control. High quality, rugged construction. Excellent VSWR. 2W power level. Usable to 4 GHz. Body: Brass, Nickel plated.

PDF Bnc Attenuator R412.420

BNC ATTENUATOR R412.420.124 20 DB 3 GHZ 1W Series : ATTENUATOR Issue : 0826 A In the effort to improve our products, we reserve the right to make changes judged to be necessary. ELECTRICAL CHARACTERISTICS Frequency (GHz) DC – 2 2 – 3 V.S.W.R (≤) 1.20 1.30 Deviation(±dB) 0.70 1.00 Operating Frequency Range DC – 3 GHz

BNC Attenuator, Plug to Socket, 10dB – Radiall | CPC UK

The R412410124 is a RF/coaxial straight attenuator with BNC plug to BNC receptacle. It has nickel-plated brass body, PTFE insulator, gold-over-nickel-plated beryllium copper female centre contact and a gold-over-nickel-plated brass male centre contact. 50R Impedance. -40 to 85°C Operating temperature range.

2 WATT BNC M-F RF Fixed Attenuators 10db, 20db, 30dB DC-3G/4GHz

2W BNC-JK Coaxial Fixed Attenuator is widely used in below fileds: Mobile Communication Network Optimization and In-door distribution system. Cluster communication, satellite communication, shortwave communication and hopping radio. Radar, electronic navigation and electronic confrontation. Aerospace equipment systems.

1W 50ohm BNC ATTENUATOR – cseonline.com.au

HAT-10+ -Mini Circuits Attenuator BNC 10dB 1W. HAT-12+ -Mini Circuits Attenuator BNC 12dB 1W. Price. Price incl GST. 1+. AU$22.00. AU$24.20. 10+. AU$20.93.

10-870-3 – BNC 3dB Attenuator 75Ohm – COAX Connectors

BNC 75 ohm attenuator – 3dB. Overall our 75 ohm series includes a range of High Performance connectors suitable for use at frequencies of 12GHz and beyond. When tested, many of these connectors have shown low loss performace up to 18GHz. BNC connectors feature a simple bayonet coupling requiring only a quarter turn to connect or disconnect.

BNC – telegartner.de

BNC Empty Box BNC Attenuator/Through Termination BNC Notch Filter BNC 19″ Patch Panel Mini-HD BNC TNC N UHF Mini-UHF FME SMA SMB/SMC/SMS SSMB MCX MMCX SMP 1.6/5.6 7-16 (DIN) Serie 4.3-10 R-TNC, R-SMA, R-BNC F pH HF Combination Connectors and Cable Clamps Inter Series Adaptors

RF Attenuators | element14 Malaysia

RF Fixed Attenuator, BNC Attenuator, 6dB, 3GHz, BNC Plug to BNC Jack, 6 dB, DC to 3GHz, 1 W, 50 ohm. RADIALL. You previously purchased this product. View in Order History. 13 available for 3 – 4 business days delivery. + Check Stock & Lead Times. 13 deliver in 3-4 business days from our UK warehouse.

BNC Connectors, BNC Connectors for Semi-rigid Cables, BNC Connectors for

BNC Connectors, BNC Connectors for Semi-rigid Cables, BNC Connectors for Flexible Cables, BNC Connectors for Receptacles – RF Connectors Cable Assembly Attenuator Filter Switch Amplifier – RFAC Solutions. Feel free to ask us any further questions. [email protected] Tel: 310-294-3868: